Power Off Stall
- Do one 180 degree or two 90 degree clearing turns.
- Carb Heat on, power to 1500RPM
- Hold altitude with pitch.
- Apply full flaps, holding altitude with forward elevator pressure as flaps come down.
- At final approach speed (65KIAS) smoothly pull off power, establish a descent (as you would coming in for landing), and then raise pitch, simulating a landing stall.
- At stall buffet, simultaneously reduce pitch, level wings, add full power, Carb Heat off, right rudder pressure.
- Immediately after power is applied raise flaps to 20 degrees (2 seconds) and raise pitch to climb attitude.
- As the airplane stabilizes, raise flaps to 10 degrees (2 seconds)
- Flaps up and transition to cruise.
0
10
20
30
40
Selected Flaps Degree: 0°
Throttle ( RPM’s )
500